HID ignitors for MK4 semi-parallel systems

Compact ignitors for flexible luminaire design

HID ignitors for semi-parallel systems

Benefits

• Wide range of lamps covered by one ignitor 35-600 W
• Digital versions ensure longer lifetime than series ignitors, and silent operation
• Smaller dimensions than predecessors mean it fits more easily into compact luminaires

Features

• Designed to ensure maximum performance with new MK4 ballasts
• Semi-parallel ignitor will only work in semi-parallel circuits and must be matched with the relevant ballast
• Ignitor equipped with screw terminal blocks as standard
• Lightweight and compact products
• Current flows through ignitor only at lamp start-up

System

• Electromagnetic system requires ballast, ignitor and capacitor
• Designed to work only in semi-parallel circuits: if ballasts with “L” in their description (e.g. BSN 100 L307…) are used, SN(D)… ignitors are required; if ballasts with “K” in their description (e.g. BSN 100 K307…) are used, SK(D)… ignitors are required. Capacitor value to match system power can be found on lamp/ballast combination sheet
• No ignitor needed for SON-I lamps

Applications

• Outdoor lighting

ComboCC Gen 4.0

Combo charge controllers Gen 4.0

Combo CC Gen 4.0 is most comprehensive range of solar charge controllers suitable for solar lighting in major, intermediate and minor roads in off-grid and hybrid applications. High system efficacy, optimised design and long life ensures lower cost of ownership. Configurable and easy to operate with remote monitoring and control ready.

Benefits

• Three different platforms: 200 Wp, 400 Wp and 600 Wp.
• Available in off-grid and hybrid options.
• Can drive luminaires from 5,000 to 24,000 lumens for a wide range of autonomy days and solar insolation.
• Integrated LED driver enables system efficacy up to 170 lumens/W.
• Integrated protection and control modules.
• Onsite programming and configuration with GUI for panel, battery and dimming profile.
• Metal weatherproof housing with several layer of protections.

Features

• Compatible with Gen 4.0 solar luminaires (BRP38x/39x)
• Off-grid and hybrid options available
• Battery type/voltage/capacity, LED wattage, dimming steps, PV panel capacity are configurable.
• IP65 housing with IP67 connectors, RH 95{b9c3e1decd1d9a6381545d5ae59cfbfb6f66ae08352fb0d9f4b009db789225db}
• IEC62109-1, IEC61547, CISPR15, IEC62093, IEC61347-2-13, EN50530, IEC62384

Applications

• Non-integral Gen 4.0 solar street light range

Gear for SDW-T lamps

CSLS 100 SDW-T 220-240V 50/60Hz

CSLS electronic control unit with impregnated (HID ‘BASIC’ ) or encapsulated (HID ‘Heavy Duty’ ) electromagnetic ballasts

Benefits

• Electronic control unit ensures reliable starting and stabilizes lamp power for optimum performance (minimum color deviation)
• Simple installation and cabling

Features

• Ballasts and electronic control units equipped with screw terminal blocks; other contact possibilities for
• Earthing-while-mounting facility (HID ‘BASIC’ ballasts), separate earth terminal (HID ‘Heavy Duty’)

Applications

• Similar to those of the related lamps

Warning & Safety

• Climatic suitability CSLS and HID BASIC: restricted to built in situations under normal conditions
• Climatic suitability CSLS and HID Heavy Duty: use in luminaires under humid conditions (not drip-proof)

Indoor Accessories

Indoor lighting control accessories cover all the user interfaces, sensors, cables, dimmers and other accessories that can be used with our control systems or stand-alone with our lighting systems.The performance and capabilities of the products vary according to the system they are connected to.

Philips Cabinet Controls

LFC7510 AmpLight Current

Controller platform to address remote group light management for diverse outdoor lighting applications. Cost effective Telmanagement, with remote control of outdoor lighting on highways, roads, streets and in residential areas. Saves energy by enabling a group of light points to be switched on or off at any given time or set to pre-determined dimming level. Makes outdoor lighting installations intelligent and dynamic, minimizing light pollution and increasing safety

Applications

• Motorways, roads
• Residential areas
• Street lighting in general

Philips OccuSwitch

The OccuSwitch is a movement detector with a built-in switch. It will switch the lights off in a room or area when it is vacated and thus save up to 30{b9c3e1decd1d9a6381545d5ae59cfbfb6f66ae08352fb0d9f4b009db789225db} on electricity The OccuSwitch can switch any load of up to 6 A and control an area of between 20 and 25 m2. A detachable mains connector enables easy installation and mounting of the OccuSwitch in the ceiling, a separate Wieland cable is available for easy, fast and trouble-free installation.

Benefits

• Energy savings of up to 30{b9c3e1decd1d9a6381545d5ae59cfbfb6f66ae08352fb0d9f4b009db789225db} and good pay-back
• Easy to install, enables even faster installation by optional Wieland connectors
• Works with almost all lamp- and luminary types

Features

• OccuSwitch has a smart timer that will extend the delay time by 10 minutes if movement is detected shortly after switch-off, assuming that the area is still in use but there is very little movement
• The OccuSwitch has a retractable shield that can be used to shield off areas, e.g. corridors, adjacent to the area the OccuSwitch is controlling

Applications

• The OccuSwitch is designed for use in offices, schools and similar applications, including toilets, storage rooms, etc
• The surface box also enables surface mounting, with either recessed wiring or surface-mounted ducts
• It is optimized for recessed ceiling mounting and for mounting heights between 2.5 and 4 meters

Dynalite Multipurpose Controllers

Within any project, many different lighting load types may be required to achieve a desired result. Each of these load types may require a different style of control. The Dynalite range of multipurpose controllers allows customization of output types via different output module units. When using DIN-rail multipurpose controllers, a specific type of control can be chosen for each circuit: relay, leading-edge dimmer, trailing-edge dimmer, driver control, controller with out-of-the-box functionality, fan control, and blind/screen control.In any combination, multiple load types can be controlled from a single device. This simplifies installation and prevents wasted capacity of circuits that are not required.

Benefits

• Controllers support distributed intelligence, i.e. each device has a CPU with presets and can act as a stand-alone control unit
• Simplified network messages and commissioning process
• Some devices have out-of-the-box functionality with re-configuration capability

Applications

• Retail and Hospitality, Office and Industry
• Residential
• Public spaces, Stadiums and multi-purpose Event Centers

Dynalite Network Devices

Sophisticated yet simple energy-efficient lighting control solutions. To bring all the different devices together, Dynalite supports a range of network devices that are useful in creating a problem-free installation.

Applications

• Retail and Hospitality, Office and Industry
• Residential
• Public spaces, Stadiums and multi-purpose Event Centers

Dynalite Signal Dimmer Controllers

DMBC110

Signal Dimmer & Relay Controller (luminaire based)

The Dynalite range of Signal Dimmer Controllers, have been engineered to meet the future demands of projects. They are capable of transmitting all industry standard driver protocols (1-10V, DSI, DALI and Broadcast DALI) and support two ranges of install opportunities of both DIN-rail and wall box, to allow for flexible install opportunities. The Signal Dimmer Controller range also support a vast range of driver controllers with a variety of circuit numbers and sizes to work individually or as part of a system, suiting any project requirement.

Benefits

• Multiple protocols supported
• Options available
• Inbuilt diagnostic functionality

Applications

• Retail and Hospitality, Office and Industry
• Public spaces, Stadiums and multi-purpose Event Centers
• Residential

Dynalite Phase-Cut Dimmers

DDLE802

8 channel Leading Edge Dimmer Controller at 2 A per channel

Leading Edge Dimmer Controllers are ideal for lighting circuits with restive and inductive properties, including mains voltage incandescent fittings, neon and low voltage lamps with a compatible electronic transformer.Available in both DIN-rail and wall box configuration, Dynalite supports a vast range of leading edge dimmer controllers with a variety of circuit numbers and sizes to work individually or part of a system, fitting any project requirement.Wall box dimmer controllers have been engineered to achieve rise times of over 100μS producing reduced filament sing, reduced supply voltage noise, resulting in extended lamp life.The dimmers are engineered to be compatible with electronic transformers, requiring less de-rating, therefore allowing full capacity of channel to be utilized.

Benefits

• Standard features will increase lamp life, reducing the ongoing project maintenance running costs.