Street Lighting Archives - PT. Sentra Cahaya Nusantara





Posted on: March 8, 2023

Ceramalux ALTO Non-Cycling


Reduce maintenance costs

Philips Ceramalux High Pressure Sodium Non-Cycling Lamps are a better value than standard high pressure sodium lamps, with longer life and reduced maintenance cost.


  • More resistant to outages caused by vibration and line voltage fluctuations.
  • 90% lumen maintenance.
  • Sustainable lighting solutions – up to 90% less mercury than standard Philips Ceramalux HPS lamps and lead free.


  • Rated average life of 30,000 hours*
  • Direct replacement for standard HPS lamps
  • 200, 250 and 400 Watts available in the ED18 mogul base / 50, 70, 100 and 150 Watts available in the ED 23-1/2 mogul base / 1000 Watts available in the ED 25 mogul base.
  • * Rated average life is the life obtained, on the average, from large representative groups of lamps in laboratory tests under controlled conditions at 10 or more operating hours per start. Approximate lumen output at 40% of rated life. It is based on survival of 65% of the lamps and allows for individual lamps or groups of lamps to vary considerably from the average.


  • Ideal for street and roadway lighting, parking lots and garages, warehouses and manufacturing facilities where lower maintenance costs are desired.

Posted on: February 10, 2023

MASTER CosmoWhite CPO-TT Xtra

MST CosmoWhite CPO-TT Xtra 60W/628 E27

The easy-fitting solution for highly energy-efficient and reliable white light outdoors

New-generation ceramic metal-halide tubular lamps used in outdoor applications, offering efficient and pleasant white light


  • Attractive white-light alternative to current standard mercury-vapor, HPS and ceramic solutions
  • Offering easy access to low-cost high-performance new system with existing standard components
  • Best combination of low investment and high energy savings (up to 65%), resulting in very low cost of ownership


  • Highly efficient white light; extremely high system efficacy
  • Long reliable lifetime; new Xtra range offering service life of up to 6 years ( > 30kh average life)
  • Unique new burner design in combination with glass outer bulb and Edison lamp base offering easy fit into existing HPS / SON luminaire platform
  • Designed for electronic gear platforms including all control features and dimming options offering flexible light levels and reduced energy consumption


  • Street lighting and area lighting, urban and residential areas and city centers; for functional lighting and city beautification

Warning & Safety

  • Use only in a totally enclosed luminaire, even during testing (IEC 61167, IEC 62035, IEC 60598)
  • The luminaire must be able to contain hot lamp parts if the lamp ruptures
  • Use only with suitable electronic control gear
  • Control gear must include end-of-life protection (IEC 61167, IEC 62035)
  • E27 lamp holders and other parts in luminaires should be designed to withstand the ignition voltage of the electronic control gear (rated at 5 kV ignition pulse)
  • A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.

Posted on: October 18, 2022

Copenhagen City LED gen2 small


Copenhagen City LED gen2 – comfortable future-ready light for your city

The original Copenhagen luminaire was co-designed with the Copenhagen’s Office of City Architecture in the 1960s with the purpose of enhancing the aesthetic appeal of the city through lighting. The latest generation of the Copenhagen City LED offers fully balanced, comfortable lighting effects with minimum glare, enabled by a round LED engine, which follows the shape of the luminaire. The opal canopy option provides further possibilities to enhance the lighting impact and provides new options for city branding as it can be used to create both static and dynamic uplight. The luminaire comes with a variety of suspensions and optics, offering maximum freedom in designing lighting for city center and residential area applications. The luminaire comes with one or two Philips SR (System Ready) sockets, which makes the luminaire future-ready. What this means is that Copenhagen City LED gen2 is ready to be paired with both standalone and advanced control and lighting software applications such as Interact City from Signify. Next to this, each individual luminaries is uniquely identifiable; thanks to the Philips Service tag application. With a simple scan of a QR code, placed on the inside of the mast door or directly on the luminaries, you gain instant access to the luminaries configuration, making maintenance and programming operations faster and easier, and enabling you to create your digital library of lighting assets and spare parts.


  • Comfortable lighting and aesthetically appealing design
  • Offering new possibilities for city branding via static and dynamic uplight options
  • Ease of serviceability and ready to be paired with standalone lighting controls and software applications such as Interact City from Signify


  • Minimized glare effect
  • Pleasant design enabled by a round LED platform following the round shape of the luminaire
  • Wide range of optics enabled by the Philips Ledgine LED
  • Option of creating static and dynamic uplight
  • Ready to be paired with controls, by being equipped with the SR (System Ready) socket
  • Easy luminaire is uniquely identifiable thanks to the Philips Service tag


  • Urban and residential streets
  • City centers and squares
  • Cycle paths, footpaths, pedestrian crossings
  • Car Parks

Posted on: August 15, 2022

Philips PrimaVision BasePerform

HID-PV Base HID-PV Base 50 SON C3 220-240V

The ideal alternative to magnetic drivers

Highly reliable electronic drivers for SON and CDO lamps designed to save energy thanks to better light efficiency compared to magnetic drivers, and to save on maintenance costs thanks to a lifetime of up to 50,000 hours.


  • Focused on best operation with SON and CDO lamps – can function for up to 6 years without maintenance cost
  • Competitive pricing – similar to magnetic system (ballast + ignitor + capacitor)
  • Same number of drivers per MCB as electromagnetic ballasts


  • Lifetime of 50,000 hours, 3-year warranty
  • Future-proof solution [A2-compliant] designed to compete with electromagnetic systems
  • Wide temperature range: -30 to + 55 °C


  • Roads
  • Urban Streets
  • Parks

Posted on: August 12, 2022

PrimaVision for CDM Elite MW

HID-PV 315 /S CDM 220-240V 50/60Hz

Highly reliable drivers for medium-wattage lamps

Highly reliable electronic drivers for medium-wattage lamps: 80,000 hours lifetime for the Xtreme version and 50,000 hours for the non-Xtreme versions


  • Most efficient white-light system in the industry in its power range
  • Minimized maintenance costs for outdoor lighting thanks to very long lifetime
  • Same energy consumption and smooth driving of the lamp regardless of fluctuations in mains voltage


  • Up to 92% system efficiency
  • PrimaVision Xtreme 210W CDM lifetime: 80,000 hours (90% survival Tc = 80 °C)
  • PrimaVision Xtreme 210W CDM: 5 kA/10 kV lightning strike protection
  • PrimaVision 315W CDM: lifetime 50,000 hours


  • Designed for optimum system performance with Philips MASTERColour CDM Elite lamps


  • High-bay shop lighting
  • Flood and area lighting
  • Road lighting and petrol stations
  • Offices and industry

Posted on: August 11, 2022

DynaVision Programmable Xtreme for CDMe

HID-DV PROG Xt 210 CDMe/CPO C2 208-277V

Xtreme drivers for maximum energy savings

Highly reliable and flexible electronic drivers for MASTERColour CDMe MW lamps; designed to save on energy costs via integrated controls and to reduce maintenance costs thanks to 80,000 hour lifetime and integrated lightning protection. The DynaVision Programmable product family is the perfect basis for any sort of lighting management solution.


  • Most efficient white-light system in the industry in its power range
  • Designed to minimize maintenance cost in outdoor lighting
  • No down-time due to calamities (storms, lightning strikes, etc.)
  • Same energy consumption and smooth driving of the lamp regardless of fluctuations in the mains voltage


  • Programmable by means of standard digital interface (DALI) and controllable via DALI protocol
  • Integrates control options (DynaDimmer)
  • Longest lifetime for electronic driver: 80,000 hours with minimum 90% survival at Tc = 80 °C
  • Lightning protection 10 kV/5 kA
  • Accurate lamp power stabilization of 95-97% over wide mains-voltage range of 180-300 V


  • High-bay retail
  • Floodlighting
  • Area and road lighting
  • Offices and industry

Posted on: August 9, 2022

PrimaVision Xtreme for SON


Xtreme drivers for the highest reliability

Highly reliable electronic drivers for SON lamps designed for saving energy via better light efficiency compared to magnetic drivers and for saving on maintenance costs thanks to a lifetime of up to 80.000 hours and the integrated Lightning protection.


  • Up to 15% energy saving due to the high driver efficiency (92%) and better wattage control at overvoltage (when compared to magnetic ballasts)
  • Minimizes maintenance cost due to the Xtreme lifetime of 80.000 hours and the integrated lightning protection
  • Better light quality as the PrimaVision Xtreme gears enable perfect output uniformity across the lighting network and solve the flickering effect (created by magnetic ballasts)


  • Xtreme long lifetime of 80.000 hours with minimum 90% survival at a case temperature of 80 °C
  • Xtreme lightning protection (10 kV)
  • Xtreme protection against humidity and vibration
  • Better lighting efficiency compared to magnetic ballasts
  • Accurate lamp power stabilization of 95-97 % over wide mains voltage range of 180-300 V


  • Residential lighting
  • City beautification
  • Road and highway lighting

Posted on: August 7, 2022

PrimaVision Economy for CPO

CertaVision CPO140

Economy drivers – reliable and energy-efficient products for outdoor lighting

Highly reliable electronic drivers for CPO lamps; the drivers are designed for outdoor use and consume less energy than conventional alternatives.


  • When used together with the CPO lamp, the driver creates the most efficient white-light system available in the industry in its power range
  • Up to 15% energy saving thanks to high driver efficiency (92%) and better wattage control at overvoltage (compared with magnetic ballasts)
  • Unlike in many magnetic systems, where different elements fail at times, these driversare so reliable that they do not require any attention whatsoever


  • Long lifetime of 60,000 hours, with minimum 90% survival at Tc = 80 °C
  • Surge protection of 4 kV/2 kA
  • Protection against humidity and vibration
  • Improved efficiency compared with magnetic ballasts


  • Residential lighting
  • City beautification
  • Road/highway lighting

Posted on: August 2, 2022

HID Ignitors for Series Systems

SI 54 380-415V 50/60Hz

Digital ignitors for maximum reliability

HID ignitors for series systems


  • Easy installation and wiring
  • Can operate with both semi-parallel and series ballasts
  • Digital ignitors ensure maximum reliability


  • Ignitors equipped with screw terminal blocks as standard
  • Series ignitor will only work in series circuits


  • Electromagnetic system requires ballast, ignitor and capacitor
  • Designed to work only in series circuits
  • No ignitor needed for SON-I lamps


  • Outdoor lighting (most popular application: road and tunnel lighting)

Posted on: September 10, 2020

Philips RoadFlair

RoadFlair – Sleek and superior beyond anticipation

Designed for major and city roads, Philips RoadFlair is a new and exciting product set to brighten your streets beyond imagination. Smartly-designed to bring cities the highest savings possible with best-in-class lumen per watt, this road lighting production comes at a competitive price bound to excite. Philips RoadFlair brings energy efficiency, improves a city’s sustainability drive and delivers significant cost reduction in urban environments. The right road luminaire coupled with the right lighting application will create the best environment for your municipality, benefiting local communities and boosting tourism and businesses.


  • High lumen efficacy 120 to 140 lumen per watt – much higher than currently available solutions
  • Unique functional design Sleek, light-weight and well-designed luminaire
  • Control and dimming ready Supports CityTouch connect application, 7-Pin Nema socket and standard outdoor dimming protocols
  • Value for money Most competitive product in its segment. Perfect for renovation, upgrading projects
  • Best-in-class LED lighting technology at an unmatched, competitive price
  • Equipped with a service tag, a QR-based identification system that makes each luminaire uniquely identifiable and provides maintenance, installation and spare part information


  • Excellent thermal management operating temperature -40 to 50 °C
  • Exposed Optic – Transparent and weather-resistant grade polycarbonate optics
  • Multipule optic – Options to meet all road and street lighting application requirements
  • Lightweight housing design
  • Available in 3000K, 40000K, 5000K and 5700K CCT options


  • Pedestrian Road
  • Highway Road
  • Residential Road
  • Interchange

Untuk Memudahkan Pencarian Produk, Silahkan Masukan "Tipe Produk" pada kolom Search dibawah ini :

News Post

Philips XGP500 OBL
Obstruction Light (Lampu Tower / Lampu Obstivision / Lampu Menara).
Philips Tango G3 LED – BVP38x
The energy-saving Philips Tango G3 LED Floodlight is the ideal solution
Philips TrueForce LED
A simple LED solution for direct HID lamp replacement



privacy policy | disclaimer

© 2023 PT. Sentra Cahaya Nusantara ~ All Rights reserved.

Call Now ButtonTelpon Kami Skr!